Mobile Compactors HG-HGS-HA-HAN

In short, the difference between a static compactor and a self-Contained Compactor is whether the press unit stays on-site or if it is attached to and follows the container.

Static compactor

A static compactor is designed to stay on-site. The press unit and the container unit are separate units and the press unit is bolted to a concrete base.

The container is attached to the press unit by ratchets. When the container is full, it is picked up for emptying and a replacement container is put into position on the press unit.

The static compactors are very well suited to handle very large amounts of waste and in situations where the is a need for constant filling.

Self-Contained Compactor

In a Self-Contained Compactor, the press unit is integrated with the container. This means that the entire unit is picked up for emptying when it is full.

The Self-Contained Compactor is often slightly smaller and have less capacity than a static compactor, because it must be easy to pick up and transport on a truck.

The Self-Contained Compactor is suitable for applications where space is confined. They can handle a wide range of waste materials including cardboard, paper, plastic, combustible waste or organic waste.

The difference between a static compactor and a Self-Contained Compactors is whether the press unit stays on-site or if it is attached to the container.

A static compactor consists of two separate units – the press unit and the container unit. The press unit is bolted to a concrete base and stays on on-site.

In a Self-Contained Compactors, the press unit is integrated with the container. This means that both the container and the press unit is picked up for emptying.

That depends on the compactor. As a rule of thumb, you can use a compactor to compact all soft materials. Examples of soft materials include cardboard, shredded paper, news paper, paper bags, soft dry plastic, and PET bottles.

There are also compactors for wet waste, polystyrene, EPS, and wood.

We always recommend that you consult with us if you wish to use your compactor for any other materials than the listed and recommended materials.

Yes. We offer very flexible rental agreements and both short-term and long-term rentals are available.

After the rental period, you can extend the rental period, buy the machine, or give it back to us. To get the most out of your compactor and to keep total track of your expenses, you can add a service agreement to your tenancy. The service agreement can be an annual service check or a full-service agreement throughout the entire rental period.

Contact one of our sales consultants to hear more about the flexible possibilities about renting a compactor.

Our compactors use 3 L / N / PE; 400 V,50 Hz as standard.

The static and Self-Contained Compactor use 16-32 amperes. The screw compactors usually use 63 amperes.

You can check the required power supply for each compactor in the product specific tech specs.

There is no simple answer to this question. Compactors are designed to handle large amounts of waste, but there might be other reasons to choose a compactor solution as well.

When we make an evaluation for you to determine your need for a compactor we consider the size of your company, your internal work structures and processes, waste handling procedures, your work flow, the time you spend handling waste, and your current solution.

All these data help us determine the best solution for you to save time and money on your waste handling.

A compactor is very safe to operate and requires no special skills. All compactors are reliable and thoroughly tested to ensure that they meet the highest safety standards.

Everyone can safely load the machine. All mechanical and electrical parts are placed inside the machine, out of reach for users. Furthermore, several safety features are in place to protect the user. The control panel is placed on the outside of the machine and gives the user easy access to start the machine. An emergency stop is also placed on the control panel within fast and easy reach.

Our compactors are manufactured by our trusted German collaborator, Presto. Presto has more than 50 years of experience within the area of environmental engineering and their products are highly recognized in the business. They all carry the EU CE marking and meet the essential requirements for health and safety set forth by the European Union. In addition, two machine groups are certified according to GS, Geprüfte Sicherheit, which means that they have been tested by a German state-approved independent laboratory to prove and ensure their safety.

As a company, Presto is certified with the ISO 9001 and SmS, Sicherheit mit System, certificates, which means that the company assesses and considers the quality and safety requirements of their customers and the requirements of the applicable standard. This is your guarantee that each Presto product will meet or beat the highest requirements of safety anytime.